Ensure a clean scrape, every time, when you back drag. Angled to maximize back dragging, the WESTERN® back drag edge is constructed to be as rugged and durable as every other component of your plow. Easy to install and easy to use, a back drag edge is a key tool in any snowfighter's kit. (The MVP 3™ back drag edge is not compatible with curb guard or shoe kits.)
|For 7' 6" models|
Go right up to the edge with bolt-on curb guards. Protect the outer edge of your snow plow from wear when plowing along sidewalks and curbs. Made of cast metal, each curb guard effectively protects the outer edge of the plow.
|#43885||For all models|
Get more jobs done faster with wings. These plow wings increase the overall plowing width by one foot, add up to 30% more carrying capacity, and minimimze snow spill-off. Made of 12-gauge steel with high strength steel ribs, these durable wings attach quickly and easily with a single pin.
|For 8' 6" models
For 9' 6" models
Protect your plow and the road. Ride above the uneven surfaces of gravel and dirt with plow shoes. The cast iron construction and shape ensures that your plow glides over gravel and dirt at the perfect height. Bolt-on shoe kit extends cutting edge and base angle life when plowing rocky or abrasive surfaces. (The MVP 3™ shoe kit and back drag edge are not compatible.)
|#43088||For all models|
This 1/2" cutting edge fits the same hole pattern as the 3/8" cutting edge that comes standard on your blade from the factory. Made of abrasion resistant steel, the 1/2" cutting edge gives your MVP 3™ v-plow extra wearability by increasing the surface area at the point of contact.
|For 7' 6" models
For 8' 6" models
This easy-to-use UltraMount® to UniMount® conversion kit enables you to attach a UniMount plow to a vehicle equipped with an UltraMount System vehicle mount. This kit is perfect if you have multiple snow plows, providing your fleet with versatility while changing to the UltraMount System. It is also ideal when transferring an old UniMount plow to a late model vehicle. When you are ready to replace the UniMount plow, the truck will already be equipped with the mount and wiring for any UltraMount® or UltraMount® 2 plow. Designed for use with all Standard, PRO, and 8' 6" MVP® UniMount plows.
|#27170||For all models|
Be prepared! These handy parts kits provide the high volume, Factory Original parts needed for emergency snow plow repairs. Packed in an easy-to-store WESTERN® factory original nylon duffle bag. This kit contains all the essentials for getting your UltraMount® plow up and running long enough to finish the job, and the bag has enough extra room for you to store any additional items you want, tailored to your needs.
|#99100||For all models|
Protect your plow while you work. Made of reinforced 3⁄16" high strength steel tube, blade stops reduce stress and wear on v-plow blades.
|#43082||For all models|
Always have the control right where you want it! FLEX ARM™ maneuvers into any position for any plower. The magnetic base allows for easy mounting and removal, plus it eliminates the standard mounting holes in your dash. The FLEX ARM is custom designed for WESTERN® Solenoid and CabCommand controls, plus it can handle any other spreader control and cellular phones with the help of the Pro-Grip mount kit. Base plate included.
|#62490||For any handheld control|
This kit has grip! Kit contains adhesive-backed locking strips to secure the WESTERN® Solenoid Control and spreader controls to interior vehicle surfaces. Allows the control to be easily removed yet held firmly in place during plowing or spreading.
|#49305K||For any joystick control|
Control the snow and always see where you're going with optional deflectors. The 2-ply rubber snow deflector fits all MVP 3™ v-plow blades. Bolt on steel plates ensure proper positioning of the deflectors to keep your view clear and clean.
|#41810||For all models|
Control even more snow with extended deflectors. Designed for the largest plows, extended deflectors ensure a clear view of your job site. The 2-ply rubber snow deflector fits all MVP 3™ blades. Bolt on steel plates ensure proper positioning of the deflectors to keep your view clear and clean.
|#41811||For all models|