These attractive blade guides with replaceable flags are standard equipment on all PRO-PLOW^® models and help improve operator visibility and plow blade positioning.

PART # 59700 (set)

Commercial blade guides are high-visibility orange (36" length - standard on HEAVY WEIGHT) or red (24" length - standard on MVP™ PLUS and PRO PLUS^®) enhanced with reflective tape.

Great markers for more than just plows!

Economy blade guides provide a low-cost alternative for all steel blades and aid in plow positioning and operator visibility. These blade guides come standard on the MIDWEIGHT™.

PART # 62265 (set)

Sometimes hardworking plowers need more steel. These 1/2" cutting edges fit to the same hole pattern as the 3/8" that come standard on your blade from the factory. The 1/2" gives your PRO-PLOW^® extra wearability to complete more jobs before you head back to the shop.

So, if you are a hardworking plower, look into the 1/2" advantage.

Made of resilient rubber compounds that allow for longer life, these rubber edges adjust to road surface irregularities without gouging and quickly remove all types of snow.

Available for the MIDWEIGHT™, PRO-PLOW^®, PRO PLUS^®, and MVP™ PLUS line of snowplows, this edge makes quick work of clearing snow away from garage or overhead doors and other tight areas. Easy, bolt-on installation.

Time to touch-up your WESTERN^® snowplow blade or black iron? Available in spray or quart cans in red or black, these Factory Original paints provide durable coverage and are mixed to match your original equipment.

Don't risk it -- Use WESTERN^® dielectric grease! Western Products recommends all owners consistently use dielectric grease to protect all electrical connections. WESTERN^® dielectric grease is specially formulated to protect your investment in rough winter snow, ice and salt conditions.

Available in quart and gallon containers, your WESTERN^® hydraulic system will operate better with the right fluid. WESTERN^® high performance hydraulic fluid is formulated to provide better viscosity in extreme temperatures. This means your system will run at the optimum level no matter what conditions you face.

Be prepared! This handy parts kit provides the high-volume, Factory Original parts needed for most emergency UltraMount^® snowplow repairs. Packed in an easy-to-store plastic case with a WESTERN^® knit cap.

Part # 67880

Available for the MVP™ PLUS and PRO PLUS^® lines of WESTERN^® plows, these optional wings add up to 30 percent more carrying capacity to your blade. No installation required - single pin design means quick and easy attach/detach.

This heavy-duty poly snow deflector is curved to improve snow containment and Roll-Action™. Constructed of high-density polyethylene material and vacuum formed with integral ribs to ensure structural integrity. Available in 7-1/2' and 9' widths to fit 7-1/2', 8', 8-1/2', and 9' steel blades. Each deflector includes clamping bars and curl braces.

The rubber snow deflector is available in 7-1/2' to 10' lengths to fit blades ranging in size from 6-1/2' to 10'. Deflectors are 2-ply rubber.

Attach these wheels to your plow blade for easy maneuvering on any hard surface. These wheels simplify blade positioning for hook-up. Dolly wheels are standard on Heavy Weight plows and available for PRO-PLOWS^® and PRO PLUS^® plows .

Always have the control right where you want it! FLEX ARM™ maneuvers into any position for any plower. The magnetic base allows for easy mounting and removal, plus it eliminates the standard mounting holes in your dash. The FLEX ARM™ is custom designed for WESTERN^® Solenoid and CabCommand controls, plus it can handle any other spreader control and any cellular phone with the help of the Pro Grip mount kit. Base plate included.

PART # 62490

This kit has grip! Kit contains adhesive-backed locking strips to secure the WESTERN^® Solenoid Control and spreader controls to interior vehicle surfaces. Allows the control to be easily removed, yet held firmly in place during plowing or spreading.

PART # 49305K

The MVP™ snowplow adapter converts a MVP™-wired vehicle for use on any UniMount straight blade. The straight blade must operate with the Solenoid or CabCommand control.

PART # 66760K

This 48" extension harness for the UniMount Solenoid Control allows for various in-cab mounting options. The extension is compatible with the Solenoid Control and CabCommand control.

PART # 61845