MVP 3™

A New Generation in V-Plow Performance

The MVP 3™ provides a whole new slant in V-plow performance and durability.  From the flared blade design and the standard UltraLock double-acting cylinders, to the patented trip edge design, the MVP 3 provides all the performance features you need for unmatched V-plow productivity.


Flared V-Plow Wings

MVP 3™ V-plow blades soar from a 31” center height up to 39” at the outer edge on the 9’ 6” models. So whether you’re busting through the big drifts, carrying and stacking, or windrowing wide areas, these wings give you all the carrying capacity and snow rolling performance you need to get the job done fast.

Reinforced V-Plow Blade Structure

The MVP 3 provides the proven structural features that separate a WESTERN®

V-plow from the rest, and so much more.

  • Eight Vertical Ribs | On the 8’ 6” and 9’ 6” models, and six on the 7’ 6” models
  • Enhanced Center Hinge | With three connection points for added strength
  • Larger Center Hinge Pin | 1¼“ diameter heat-treated steel for more durability
  • Bigger Lift Ram | 1¾“ diameter cylinder for more lifting power
  • Power Bar | Provides added reinforcement across the entire back of blade for increased structural rigidity
  • Improved T-Frame Design | For additional strength

Trip Edge Protection

Each blade features independent trip edge protection to get over bumps and obstacles, whether in vee, scoop, or straight-blade configuration, helping to protect the plow, the truck and the operator. Since only the edge trips, snow stays in front of the blade, so you can keep on going without dumping the entire load of snow.

Double-Acting Cylinders Standard

UltraLock double-acting cylinders are standard on the MVP 3 allowing the operator to lock the wings together to use the V-plow in straight blade mode, with single button control. Double-acting cylinders also hold the wings firmly in place, for clean, efficient back dragging.

Steel Cover for Center Hinge

The steel top center gap cover and formed cutting edges reduce snow leakage in all blade positions.

UltraMount® 2

An enhanced version of the popular UltraMount® mounting system

  • Fast and easy – no tools required!
  • Extra wide receiver brackets for easy drive-in alignment
  • New one-piece lift frame design for added strength and durability
  • Simple mechanical connecting hook
  • Rotating pivot bar keeps attaching points level
  • Blade pivots while plowing for a cleaner scrape
  • Chain lift system for higher stacking and safe emergency transport
  • Removable receiver brackets for off-season ground clearance

Reliable Hydraulics

Western Products manufactures its own hydraulics components to assure the highest quality and reliability standards. So you get a hydraulics system that's not only fast and responsive, but one that's built to last season after season.

  • Fast responsive hydraulics for maximum snow plowing efficiency
  • Fully enclosed components are protected from the elements   

Chain Lift System

  • With the chain lift system, you get instantaneous “float” when lowering the blade. Unrestricted, the blade can freely follow the contours of the plowing surface for a cleaner scrape.
  • With the chain lift you can stack higher because you’re not limited by the hydraulic ram stroke, unlike cylinder lift systems, which can only pull the snow plow up as far as the limits of the cylinder’s range.
  • In the rare event of a hydraulic failure, you can push the snow plow up into a snowbank and “short chain” the snow plow by attaching it to the specially designed bracket and safely transport the snow plow back to the shop.

Intuitive Plow Controls

Universal Intuitive Control Options   

Choose between the CabCommand hand-held control option, or the joystick control for efficient, precise and intuitive blade control.

CabCommand Control Option

  • Power “on” and “float” LED
  • Backlit for night operation
  • Coil cord for easy mobility

Joystick Control Option

  • Compact to fit anywhere
  • On/off indicator light
  • Plug-in connecter for easy removal 

FLEET FLEX Electrical System

The FLEET FLEX electrical system provides true fleet interchangeability among current UltraMount® and UltraMount® 2 mounted snow plows. The same handheld or joystick control operates the following WESTERN® snow plows.

            WIDE-OUT™            PRO PLUS®

            PRODIGY™              PRO-PLOW®

            MVP 3™                  MIDWEIGHT™

            MVP PLUS™           HTS™


Features include:

  • Programmable "soft-stop" and "one-touch" float
  • SECURITY GUARD™ Plow Anti-Theft System

SECURITY GUARD™ Plow Anti-Theft System

The exclusive WESTERN® SECURITY GUARD™ snow plow anti-theft system is a safe and secure way to electronically “lock” your snow plow when it is detached from your truck. 

  • Electronically synchronizes your snow plow control and plow module
  • When activated, SECURITY GUARD disables the electrical control system and renders the plow inoperable to unauthorized users
  • Activate or deactivate at your discretion

NIGHTHAWK™ Halogen Headlamps

  • State-of-the-art reflector optics
  • Smooth wide beam pattern
  • Robust two-stud mounting
  • Watertight adhesive-bonded housing
  • Long life halogen bulbs

ULTRAFINISH™ Baked-On Powder Coat

The ULTRAFINISH™ powder coat provides outstanding protection against wear and rust.

  • Eight-wheel shot blaster pre-treatment removes mill scale and abrades surfaces for optimum adhesion
  • Multi-stage pre-wash provides superior surface preparation
  • Epoxy primer is applied to enhance powder adhesion
  • Robotic guns deliver precise, consistent powder coat coverage
  • Final baking process provides a long-lasting hard-as-nails WESTERN red, that’s become synonymous with quality

MVP 3™ Video

Model Blade Width Blade Height Plowing Width
(full angle)
Approx. Weight
(less mount)
SS or PC
7' 6"37" at end
31" at hinge
6' 7" full angle
6' 4" scoop
6' 10" full
885 lb
SS or PC
8' 6"38" at end
31" at hinge
7' 5" full angle
7' 2" scoop
7' 8" full V
940 lb
SS or PC
9' 6"39" at end
31" at hinge
8' 6" full angle
8' 2" scoop
8' 7" full V
1022 lb
MVP 3 Poly8' 6"38" at end
31" at hinge
7' 5" full angle
7' 2" scoop
7' 8" full V
890 lb
MVP 3 Poly9' 6"39" at end
31" at hinge
8' 6" full angle
8' 2" scoop
8' 7" full V
972 lb
Quick Match™