Back To Top

Striker (0.35 cu yd) Accessories

Extension Collars

0.25 cu yd extension collars are available as an accessory to increase material capacity for UTVs and compact trucks that can handle the additional weight.

Part Number
#85699 For 0.35 cu yd models

Spill Guard Kit

A Spill Guard Kit provides the loader with an improved line of sight to the hopper edges, extending the edges of the hopper to 60” for the 0.35 cu yd model. This allows loading with a 5’ loader bucket and prevents overflow and spill into the bed of the vehicle.

Part Number
#85696 30” Kit for 0.35 cu yd Models

LED Work Light Kit

See more to do more with the Work Light Kit for better visibility at the rear of your spreader at night. Encased in anodized aluminum, and good to less than minus 20 degrees, this LED work light will put over 1000 lumens where you need them, when you need them. The LEDs mean low amp draw, so you can easily use more than one.

Part Number
#99505-1 For 0.35 cu yd models

LED STROBE LIGHT KIT

Make sure you're seen, day or night, with our Strobe Lights for added visibility during operation. Encased in high impact plastic, this yellow LED strobe works in temperatures as cold as -20°F and will ensure that you're seen in all but the worst of conditions. Make sure you spread safely with strobe light markers.

Part Number
#99494 For 0.35 cu yd models

Central Point Grease Kit

The Central Point Grease Kit provides easy access to grease points, simplifying preventative maintenance greasing that is essential to maximize bearing life.

Part Number
#11763 For 0.35 cu yd models

Vibrator Kit

Loosen up with this Vibrator Kit to help move stubborn material and prevent bridging. Featuring a 200V DC vibrator motor in a metal housing, our vibrator will help prevent bridging and clogging, improving material flow so you can do your job faster and better.

Part Number
#76668 For 0.35 cu yd models

Inverted V Kit

Reduce heavy startup loads on the drivetrain and potential bridging during operations with the optional inverted V. Made of 12 gauge 201 stainless steel, the inverted V is strong and corrosion resistant, for use in highly demanding environments. The inverted V is easy to assemble and install and will provide years of trouble free use.

Part Number
#85706 For 0.35 cu yd models

License Plate Kit

Stay street legal with this illuminated License Plate Kit for your alternate license plate location. Providing convenient mount methods and lighting in a high impact plastic casing, the license plate kit allows you to move your license to a spot that is visible and legally compliant. Don't leave without it. Required if using 0.35 cu yd hopper on a truck.

Part Number
#85694 For 0.35 cu yd models

Ratchet Tie-Down Kit

This Tie-Down Kit provides additional in-bed stability and security. The 4,000 pound, high-strength shipping straps allow you to add an extra measure of safety as you move tons of salt down the road. Each kit includes four ratchet tie down assemblies. (Hoppers require bolting to the truck frame for proper operator safety.)

Part Number
#68790 For 0.35 cu yd models

Truck Upfit Kit

This kit contains a longer truck harness, a license plate kit, a CHMSL kit, and a ratchet tie down kit so the 0.35 cu yd hopper can be used in place of an auger tailgate spreader when using sand.

Part Number
#85693 For 0.35 cu yd models

UTV SPREADER CONTROL SHIELD

Keep your UTV spreader control protected from the elements with the UTV Spreader Control Shield. A molded, plastic “visor” attaches to the top of the UTV spreader control to protect it from the rain or snow.

Part Number
#78585 For 0.35 cu yd models

SPREADER CONTROL ADAPTER PLATE FOR CUP HOLDER MOUNT

Gain the flexibility and easy installation benefits of the cup holder control mount with every spreader installation using the new Spreader Control Adapter Plate Kit. Kit contains a durable metal mounting plate and hardware. Cup Holder Mount not included, order separately (#82007).

Part Number
#82018 For 0.35 cu yd models

Control Cup Holder Mount

Put a hard stop to juggling controls and cell phones. Functional and practical, the Control Cup Holder Mount lets you secure your WESTERN plow controls or your smartphone (not included) on a flexible gooseneck mount for optimal, customizable positioning. This compact, easy-to-install genuine WESTERN accessory is designed to fit firmly into most size cup holders in your vehicle.

Part Number
#82007 For all models

VEHICLE-SIDE HARNESS KIT

The Vehicle-Side Harness Kit contains components to replace harnessing on the truck or wire a second truck to operate the spreader.

Part Number
#85692 For 0.35 cu yd models

Dielectric Grease

Don’t risk corrosion problems—use WESTERN® dielectric grease! Western Products recommends all owners consistently use our special formulation dielectric grease to protect all electrical connections in the tough winter snow, ice, and salt conditions.

Part Number
#49326 2 oz. tube

EXTREME DEFENSE GREASE

Protect and maintain moving components within snow and ice equipment including bearings, hinges and pivot bolts with EXTREME DEFENSE Grease. WESTERN’s specially designed blend is optimized for the cold, wet and dirty environment common to snow and ice management. Custom formula maintains viscosity from -40 up to 300 degrees, and military-grade, corrosion-prevention additives protect equipment investments for the long haul with no harmful environmental side effects. EXTREME DEFENSE Grease is available in cartridges, pails, totes and drums.

Part Number
#72909
#72910
#72911
#72912
14 oz cartridge
7 lb pail
120 lb tote
400 lb drum