The Right Size
For The Job

The WESTERN® Striker™ 0.7 and 0.35 cu yd stainless steel hopper spreaders offer the features and accessories that give you the performance, capabilities and efficiency of larger WESTERN Striker hopper spreaders, but in a more compact size that’s better suited to handle smaller spaces and jobs. It’s been designed to provide excellent material flow and delivery to the spinner.

Striker™ (0.35 & 0.7 cu yd)

Unique features

Previous Next

Dual Electric Motors

A fully enclosed 12-volt electric, 1/3 HP motor is mounted inside a sealed housing, protecting it from corrosion.

Previous Next


Enhanced dual variable-speed control allows you to precisely match material delivery and spread patterns to conditions. Four standard accessory buttons and a dedicated blast button provide optimum in-cab efficiency.

Easy-to-understand, digital self-diagnostics alert the operator when the hopper is empty or when adjustments are needed, and LEDs make the controls easy to read. Its compact size compared to traditional controls fits easily into today’s modern vehicle cab designs.

Previous Next

Innovative Chute Design

Reduce material waste with this innovative chute design. Baffles within the chute deliver material to the areas of the spinner that cast it out and away from the truck, instead of back onto your bumper.

Previous Next

Corrosion-Resistant Hopper

The low-maintenance, stainless steel, riveted construction provides durability for long-life and protection against stress.

Previous Next

Shutter Deflector

The easy-to-adjust circular shutter deflector allows one-side spreading operation, providing optimal control by keeping materials away from areas they aren’t needed, and spreading more evenly where they are.

Previous Next

Material Delivery

The 0.35 cu yd features a 11½"-wide pintle chain conveyor system while the 0.7 cu yd features a 15½"-wide pintle chain. This moves material consistently and smoothly to prevent bridging.

Previous Next


An extra large 12" polyurethane spinner delivers a spread pattern of up to 30' and provides long-lasting, corrosion-free performance.

*0.7 cu yd hopper shown

Previous Next

Accessory Integration

Conveniently connect accessories directly into the fully enclosed accessory hub mounted in the back of the hopper. Accessories automatically integrate with the hopper control without having to run additional wires from the front of the vehicle.

Previous Next

Dump Button & Work Light

Located at the rear of the hopper, two dump buttons run the conveyor for easily unloading excess material or quickly filling a walk-behind spreader.

Controlled by a third button, an accessory work light can be attached to illuminate the area at the rear of the spreader for better visibility when operating the dump buttons or working at the back of the hopper.

Previous Next

Flip-Up Chute

Provides convenient access to the hitch, better ground clearance and easy clean-out.

Previous Next

Accessory Knock-Outs

Hoppers feature knock-out holes for plug n' play integration of certain accessories.

Previous Next

Top Screen

The standard coated steel top screen helps break up large chunks of de-icing material during the loading process to help prevent clogging and bridging during spreader operation.

Previous Next


The Striker™ hopper spreaders are designed with FLEET FLEX technology for easy interchange between electric hopper spreaders without having to change the wiring or the controls. It provides easy operation, increased reliability, simple wiring and easy installation. Additionally, accessories automatically integrate into the control for easy plug 'n play.



An extension collar is available as an accessory to increase material capacity for vehicles that can handle the additional weight. 0.25 cu yd extension collars available for the 0.35 cu yd hoppers and 0.5 cu yd extension collars available for the 0.7 cu yd hoppers.


With the addition of this accessory to the 0.7 cu yd model, operators will have the ability to pre-wet materials or spray brine directly onto the driving surface for anti-icing applications. The accessory kit includes two 25-gallon pre-wet tanks, a pump and a spray kit.


A Spill Guard Kit provides the loader with an improved line of sight to the hopper edges, extending the edges of the hopper to 60” for the 0.35 cu yd model and 75.5” for the 0.7 cu yd model. This allows loading with a 5’ loader bucket and prevents overflow and spill into the bed of the vehicle.


Models 0.7 cu yd 0.35 cu yd
Body Side Length 54" 1.37 m 30" 0.76 m
Capacity 0.7 cu yd 0.54 cu m 0.35 cu yd 0.27 cu m
Hopper Construction 16 ga SS 1.5 mm SS 16 ga SS 1.5 mm SS
Hopper Dimensions (LxWxH) 54" x 43" x 28" 137.16 cm x 109.22 cm x 71.12 cm 30" x 38" x 26" 76.20 cm x 96.52 cm x 66.04 cm
Overall Dimensions (LxWxH) 81" x 43" x 46" 205.74 cm x 109.22 cm x 116.84 cm 57" x 38" x 46" 144.78 cm x 96.52 cm x 116.84 cm
Min. Bed Length Required 44" 111.76 cm 30" 76.20 cm
Approx. Weight (Empty)
Dual 12V DC Sealed Motors
420 lb 190.51 kg 235 lb 106.59 kg
Conveyor Width 15 ½" 39.37 cm 11 ½" 29.21 cm
Spinner Size 12" 30.48 cm 12" 30.48 cm
Spreading Width Up to 30 ft Up to 9.14 m Up to 30 ft Up to 9.14 m
Material Salt, Sand, Salt/Sand Mix Salt, Sand, Salt/Sand Mix Salt, Sand, Salt/Sand Mix Salt, Sand, Salt/Sand Mix
Vehicle Application 1/2-Ton & Light Duty Pickup Trucks 1/2-Ton & Light Duty Pickup Trucks UTVs & Compact Trucks UTVs & Compact Trucks

Does this Spreader fit my vehicle?

Visit Spreader Selector

Product literature

Sell Sheets

Striker™ 0.7 cu yd Stainless Steel Hopper Spreader Sell Sheet


Sell Sheets

Striker™ 0.35 cu yd Stainless Steel Hopper Spreader Sell Sheet

Back To Top