PURPOSE-BUILT FOR UTVS
0.35 CU YD STAINLESS STEEL HOPPER SPREADER
COMPACT, CONTROLLED PERFORMANCE
The Striker™ 0.35 cu yd stainless steel hopper spreader delivers reliable, low-maintenance performance with more control. The 0.35 cu yd model is designed to allow material to flow smoothly and efficiently, and is purpose-built with many of the same features of our larger Striker hopper spreaders but at the right size for UTVs and compact trucks.
Dual Electric Motors
A fully enclosed 12-volt electric, ⅓ HP motor is mounted inside a sealed housing, protecting it from corrosion.
Enhanced dual variable-speed control allows you to precisely match material delivery and spread patterns to conditions. Four standard accessory buttons and a dedicated blast button provide optimum in-cab efficiency.
Easy-to-understand, digital self-diagnostics alert the operator when the hopper is empty or when adjustments are needed, and LEDs make the controls easy to read. Its compact size compared to traditional controls fits easily into today’s modern UTV cab designs.
Innovative Chute Design
Reduce material waste with this innovative chute design. Baffles within the chute deliver material to the areas of the spinner that cast it out and away from the truck, instead of back onto your bumper.
The low-maintenance, stainless steel, riveted construction provides durability for long-life and protection against stress.
The easy-to-adjust circular shutter deflector allows one-side spreading operation, providing optimal control by keeping materials away from areas they aren’t needed, and spreading more evenly where they are.
Features a 11½"-wide pintle chain conveyor system that moves material consistently and smoothly to prevent bridging.
An extra large 12" polyurethane spinner delivers a spread pattern of up to 30' and provides long-lasting, corrosion-free performance.
Conveniently connect accessories directly into the fully enclosed accessory hub mounted in the back of the hopper. Accessories automatically integrate with the hopper control without having to run additional wires from the front of the vehicle.
Dump Button & Work Light
Located at the rear of the hopper, two dump buttons run the conveyor for easily unloading excess material.
Controlled by a third button, an accessory work light can be attached to illuminate the area at the rear of the spreader for better visibility when operating the dump buttons or working at the back of the hopper.
Provides convenient access to the hitch, better ground clearance and easy clean-out.
Hoppers feature knock-out holes for plug and play integration of certain accessories.
The standard coated steel top screen helps break up large chunks of de-icing material during the loading process to help prevent clogging and bridging during spreader operation.
The Striker™ hopper spreader is designed with FLEET FLEX technology for easy interchange between electric hopper spreaders without having to change the wiring or the controls. It provides easy operation, increased reliability, simple wiring and easy installation. Additionally, accessories automatically integrate into the control for easy plug and play.
0.25 cu yd extension collars are available as an accessory to increase material capacity for UTVs and compact trucks that can handle the additional weight.
SPILL GUARD KIT
A Spill Guard Kit provides the loader with an improved line of sight to the hopper edges, extending the edges of the hopper to 60” for the 0.35 cu yd model. This allows loading with a 5’ loader bucket and prevents overflow and spill into the bed of the vehicle.
LED WORK LIGHT KIT
See more to do more with the Work Light Kit for better visibility at the rear of your spreader at night. Encased in anodized aluminum, and good to less than minus 20 degrees, this LED work light will put over 1000 lumens where you need them, when you need them. The LEDs mean low amp draw, so you can easily use more than one.
|Models||0.35 cu yd|
|Body Side Length||30" 0.76 m|
|Capacity||0.35 cu yd 0.27 cu m|
|Hopper Construction||16 ga SS 1.5 mm SS|
|Hopper Dimensions (LxWxH)||30" x 38" x 26" 76.20 cm x 96.52 cm x 66.04 cm|
|Overall Dimensions (LxWxH)||57" x 38" x 46" 144.78 cm x 96.52 cm x 116.84 cm|
|Min. Bed Length Required||30" 76.20 cm|
|Approx. Weight (Empty)
Dual 12V DC Sealed Motors
|235 lb 106.59 kg|
|Conveyor Width||11 ½" 29.21 cm|
|Spinner Size||12" 30.48 cm|
|Spreading Width||Up to 30 ft Up to 9.14 m|
|Material||Salt, Sand, Salt/Sand Mix Salt, Sand, Salt/Sand Mix|
|Vehicle Application||UTVs & Compact Trucks UTVs & Compact Trucks|